#2-64 tap drill size
#50
- Inches
- 0.0700
- Millimetres
- 1.78
- Thread
- 79%
Drill a #50 hole before cutting a #2-64 thread. That is the standard tap drill for about 75% thread.
#2-64 thread and hole sizes
| Thread | #2 diameter, 64 threads per inch, fine (UNF) |
|---|---|
| Major diameter | 0.0860 in 2.18 mm |
| Pitch | 0.0156 in 0.397 mm |
| Tap drill, about 75% thread | #50 0.0700 in |
| Tap drill, about 50% thread | #48 0.0760 in, for stainless and other hard materials |
| Clearance hole, close fit | #43 0.0890 in |
| Clearance hole, free fit | #41 0.0960 in |
| Nearest metric bit | 1.8 mm |
Why #50
A tap cuts threads into the wall of a hole, so the hole has to be smaller than the screw. For a #2-64 thread the hole that leaves exactly 75% thread is 0.0708 in. The closest standard bit is #50 at 0.0700 in, which leaves 79%.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go one step larger.
Tools for this job
- #2-64 tap
- #50 drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details