M12 x 1.75 tap drill size
10.2 mm
- Inches
- 0.4016
- Inch bit
- Letter Y
- Thread
- 79%
Drill a 10.2 mm hole before cutting an M12 thread with 1.75 mm pitch. The rule for metric taps is diameter minus pitch.
No metric bits? A Letter Y bit (0.4040 in) gives about 76% thread.
M12 x 1.75 thread and hole sizes
| Thread | M12, 1.75 mm pitch, coarse |
|---|---|
| Major diameter | 12 mm 0.4724 in |
| Tap drill | 10.2 mm 0.4016 in |
| Closest inch bit | Letter Y 0.4040 in |
| Clearance hole, close fit | 13 mm |
| Clearance hole, medium fit | 13.5 mm |
Why 10.2 mm
Subtract the pitch from the diameter: 12 minus 1.75 is 10.25 mm, and charts list the nearest stocked bit, 10.2 mm. That leaves 79% thread, the usual target for a cut tap.
More thread than that adds almost no strength and makes the tap much easier to break. In hard or tough material, go 0.1 mm larger.
Tools for this job
- M12 x 1.75 tap
- 10.2 mm drill bit
- Tap and drill set
- Drill bit size gauge
- Thread pitch gauge
- Cutting oil for tapping
As an Amazon Associate we earn from qualifying purchases. Details